UV DTF Gang Sheet

How to Apply Your UV DTF Transfer (No Heat)

UV DTF is for hard, smooth surfaces — cups, tumblers, bottles, glass, metal, acrylic. No heat press needed.

1. Clean & dry the surface — wipe with rubbing alcohol; make sure it's smooth and dust-free.
2. Peel the printed transfer off its paper backing.
3. Position it on the surface where you want it.
4. Rub firmly with a squeegee or card, from the center outward, to remove bubbles and fully adhere.
5. Slowly peel the clear top film, leaving the design on the surface.
6. Let it cure 24–72 hours before washing or heavy handling.

Care

• Hand wash recommended. Avoid soaking, dishwashers, and abrasive scrubbing.
• For hard surfaces only — not for fabric or stretchy items.

Handling & Storage

Store flat, at room temperature, away from sunlight and moisture. Apply at room temperature for best adhesion. Send a 300 DPI PNG with transparent background — we print exactly as sent.